Vincent, the blogger behind the Plastic Pilot blog, has written a great short post where he mentioned three key lessons that airlines can teach general aviation. Vincent began his post by first acknowledging that while general aviation’s safety record is generally good, there are still a few things general aviation pilots can learn from airline pilots. He then mentioned the following three areas where there are lessons for general aviation pilots to follow:
SOP, flow patterns and checklists. In addition to checklists, Vincent pointed out that airlines go beyond the use of checklists. Airlines also use Standard Operation Procedures (SOPs) and flow patterns to do all the actions before cross-checking with a checklist.
Briefings. Moreover, Vincent noted that airline crews also run through detailed briefings before each and every flight and he also does the same. Specifically, Vincent’s briefings cover the following items:
- Take-off type (standard, performance, soft-field)
- Vr, Vx, Vy (and Vmca if flying a twin)
- Safety altitude
- Actions in case of aborted take-off
- Actions in case of emergency after take-off, depending on conditions (VMC or IMC)
Vincent also noted that for an approach briefing, he uses the Jeppesen Briefing Strip on top of the approach chart.
Sterile cockpit. Finally, Vincent pointed out that airlines have a sterile cockpit rule for both departures and approaches and typically when operating under 10,000 feet so that the pilot and crew can be focused on flying the aircraft. Hence and when he is flying with passengers, Vincent tells them when he needs to concentrate on flying and when he can carry on a conversation with them.
Keeping the above safety airline lessons in mind will make you a much safer and more professional general aviation pilot.
